Tips and Tricks to Crack GATE-2010 Exam...

GATE exam is used for entrance into M.E./M.TECH. in various engineering colleges in India (including the IITs and IISC). Some Tips and Tricks to Crack GATE Exam are not only by joining an institute or joining online class rooms but the Systematic preparation is only the way to qualify this exam.

I have following suggestions for you :

1. Bring previous year question papers
2. Start back study (i.e. pick up question and find the solution) I personally believe if you practice to solve all the question from the previous asked (at least 6-8 year) you can definitely qualify the exam.
3. Another important fact is: do not answer wrong during the examination even your total score is only 35 to 45 % (mostly people could not qualify exam because they attemt to answer wrong question).
4. Keep in mind, most of the time negative marking is only responsible to the failure.
I hope if you follow all these suggestion you will definitely qualify the exam.
5. You check the syllabus of the GATE exam on IIT sites.
6. Find out your weak subjects in the GATE syllabus.
7. Give more thrust to weak subject.
8. collect various questions which are having some tricky logic

Preparation Tips for GATE Exam :



1.Material Collection

* Syllabus
* All the relevant books based on the subject(Divide the books in two groups – (1) Fundamental and basic concepts (2) Problem oriented
* Some books helpful for pre-requisite knowledge on the subject
* Some good guide books for GATE
* Previous questions papers ( Click Here )

2.Keep contact with some expert and GATE experienced persons

3.Study – Syllabus and Previous questions papers

4.Start from the first chapter

* read at least 5 books, it will widen your knowledge (if necessary consult with the books for pre-requisite knowledge or with some expert)
* Note down the probable concepts(definitions, unit, dimension etc.)
* Note down necessary theories, formulae etc
* Solve problems as maximum as possible(from text books, Guide books etc)
* Think about various tricks in solving problems(if necessary, note it)
* Go for series of self tests based on this chapter(take other’s help to conduct tests)
* Continue the self tests until getting a very good score

5.Solve more and more problems, discover more and more new tricks…

6.Follow the same procedure for the rest chapters

7.Finally, go for self tests based on whole syllabus(take other’s help to conduct these tests)

8.On the exam day…you will be at the Pick, who can stop you?


Click this link for Gate Question PaperS

GATE - 99 percentile in 60 days

"THE GRADUATE APTITUDE TEST IN ENGINEERING (GATE) IS AN ALL-INDIA EXAMINATION ADMINISTERED AND CONDUCTED IN EIGHT ZONES ACROSS THE COUNTRY BY THE GATE COMMITTEE COMPRISING FACULTY FROM INDIAN INSTITUTE OF SCIENCE, BANGALORE AND SEVEN INDIAN INSTITUTES OF TECHNOLOGY ON BEHALF OF THE NATIONAL COORDINATING BOARD - GATE, DEPARTMENT OF EDUCATION, MINISTRY OF HUMAN RESOURCES DEVELOPMENT (MHRD), GOVERNMENT OF INDIA"

After pursuing engineering, all engineering students stand at the crossroad of making a decisive choice so as to explore interesting avenues as a choice for their careers. A majority of people opt for mainly two things that are management or M.Tech. With the current economic scenario of the India, there are various colleges that are not able to give 100% placement to their students. This results in candidates making a tough choice between management and M.Tech. In order to get admission in M.Tech the examination that holds significant importance on national as well as international level is GATE. So, if you are the one seeking admission in post-graduation programmes in reputed engineering colleges and institutes in India, you need to crack GATE. Graduate Aptitude Test in Engineering (GATE), is an All-India examination that holds high significant and is conducted in eight zones across India by the GATE committee. The main objective of GATE test is to identify the quality of students and assess their potential to continue higher education. By conducting GATE, it becomes easy to evaluate the students on the required skill scale and consistency to pursue higher studies in the field of engineering. With the cut-throat competition, even those who save more than 85% in the GATE examination, lag behind in getting admissions into the reckoned institutions such as NITs and IITs. The questions of GATE are usually the derivation of fundamentals and preparation of GATE is an ongoing process and is supposed to take place in varied stages. Prepare your best with the fundamentals and then test yourself those fundamentals. There are students who prepare at home with the number of book options available in the market today. Then there are few aspirants who opt for correspondence coaching courses. A coaching material cannot be assessed until one goes through the same word by word. Hence GATE aspirants can go by some tips of their seniors. Those who are getting regular classroom coaching need to check whether the institute suits their requirement or not by considering some of the following parameters: • Distinct Study Material- Now-a-days all the coaching institutes offer study material for assistance in studies. But if this material simply copy paste or re-write of materials taken from other books then these hold minimal importance. In comparison to all this, there are several standard books on each subject by good authors which can make your study enjoyable as well as interesting. • Compilation of quality books- While studying theory, conceptualization and building application capabilities, and one needs good collection of books, which can really put our brain on exercise. Ensure that your coaching institute has a collection of good and informative books. • Flexibility- There are aspirants who have slow or fast grasping power than the average. In such cases, it is better to ascertain the model that suits your needs and provide enough guidance to you at the same time. • Tests and Evaluation Model- Ensure and track your progress through a set of tests and evaluation as this is the most crucial part of the preparation. This is the main area where the students fail due to lack of essential test and evaluation material. Gateprep is specially designed for GATE aspirants. It aims to facilitate engineering graduates or those perusing their B Sc eventually getting M Tech degrees from one of the premier institution of the country like the IITs, IISc & Tata Institute

Indian Oil Corporation Ltd needs 200 engineers in 2010 : Recruitment besd on GATE score

Applications are invited for the position of Engineers/ Graduate Apprentice Engineers (GAEs) in the following engineering disciplines:

• Chemical Engineering (Including Petrochemicals engineering)
• Civil Engineering
• Electrical Engineering
• Instrumentation Engineering (Including Electronics & Instrumentation engineering but excluding Electronics & Communication engineering/ Telecommunication engineering)
• Mechanical Engineering (excluding Production/ Manufacturing/ Industrial engineering)
• Metallurgical Engineering


Important Date:
13th February 2010 is the last date for receiving application On-Line

The eligibility criteria regarding prescribed educational qualification, age and other eligibility criteria and application procedure is mentioned below:

Educational Qualification:
• Candidates should have passed qualifying degree examinations and awarded bachelor’s degree in engineering/ technology in the above mentioned disciplines (full time regular courses only) from recognized Indian Universities / Institutes.
• Candidates (belonging to general and OBC category) should have secured minimum 65% marks in qualifying degree examinations. It is relaxed to pass class for SC/ST/PH candidates. Candidates currently in final year of their engineering studies may also apply. However, if selected, they must be in a position to submit their final mark sheet by 31st July 2010.

Age Limit:
• Maximum 26 years as on 30th June, 2010 for the general category candidates. Age relaxation for OBC (Non Creamy Layer)/SC/ST/PH candidates will be applicable as per the Presidential Directive.

Physical Fitness:
Desirous candidates seeking employment with IndianOil needs to be medically fit as per IndianOil’s pre-employment medical standard. Candidates are advised to go through the ‘Guidelines and Criteria for Physical Fitness for Pre-employment medical Examination’ before they commence the application process.

Selection, Training and Placement:
The selection methodology will comprise of the following:
• Graduate Aptitude Test in Engineers (GATE) 2010 score of the candidates in the concerned disciplines. The graduate engineers from the relevant disciplines, desirous of taking up a career with IndianOil are required to appear in GATE-2010 in the same disciplines.
• On the basis of GATE-2010 score, the candidates will be short listed for further selection process comprising of:
o Group Discussion / Group Task
o Personal Interview for assessment of different facets of knowledge, skill, attitude and aptitude.

Candidates will have to qualify through each stage of selection process successfully before being adjudged as suitable for selection. Selected candidates shall have all-India transfer liability and may be posted to any Division / Unit / Subsidiary Company / Office of the Corporation. General category candidates will have to execute a bond of Rs.1,00,000 (Rs.25000/- for SC/ST/OBC & PH candidates) to serve the Corporation for a minimum period of three years from the date of joining (date of appointment as Engineer in case of GAEs after successful completion of training).

Remuneration Package:
Engineers/ Officers:
Candidates selected as engineers/officers will receive a provisional starting basic pay of Rs.23000/-per month. In addition, the selected candidates will receive Dearness Allowance (DA) and other allowances, according to the rules of the Corporation in force, as amended from time to time.Other allowances / benefits include HRA / subsidized housing accommodation (depending upon place of posting), medical facilities, performance related pay, gratuity, contributory provident fund, employees pension scheme, group personal accident insurance scheme, leave encashment, leave travel concession (LTC)/ LFA, contributory superannuation benefit fund scheme, house building advance(HBA), conveyance advance/ maintenance reimbursement, professional updation allowance, lap-top computer, children’s education allowance etc. as per rules. The Cost-to-Company (CTC), in case of a metro city posting, will be around Rs. 7.60 lakhs per annum inclusive of performance related pay (PRP)

Graduate Apprentice Engineers (GAEs):
Candidates selected as GAEs for one-year apprenticeship training will be paid consolidated stipend @ Rs.20,000/- per month. Upon successful completion of apprenticeship training, they may be appointed as engineers in the scale of pay referred above.




How to apply:
1. GATE-2010 is scheduled on 14th February 2010. For detailed information on GATE-2010, interested candidates may log on to websites of other IITs and Indian Institute of Science (IISc), Bangalore.

2. Candidates need to purchase the GATE application form as per the information provided in GATE-2010 websites. They should fill-in and submit the GATE application form as instructed by the GATE authorities and wait for the admit card to get the GATE registration number.
3. The candidates will receive their GATE-2010 registration number printed on their admit card. On receipt of GATE registration number, the candidates need to apply in IndianOil on-line.

Apply Online
Click above to
apply on-line

4. Candidates should click on the on-line application link, read the instructions carefully and fill-in the on-line application form giving accurate information including the GATE-2010 registration number.
5. Upon completion, the candidate should submit the online application by clicking the Submit button at the bottom of the page. If the same is accepted, the system will generate a unique application ID along with the completed application form.
6. Candidate should take a print out of completed application, affix his/her recent passport size photograph, put his/ her signature at the space provided and keep with him/ her safely for future reference. The passport size photograph affixed by the candidate should be the same submitted along with GATE application form. In case the candidate called for GD/GT and interview, he/she should come with this printed application form, along with GATE-2010 admit card and GATE-2010 official score card.
7. 13th February 2010 is the last date for receiving application On-Line.

More Information
Click above for more
Information about Indian Oil

"DOWNLOAD MANAGER" it's my 5th Sem. Project.

Download Manager Project



"DOWNLOAD MANAGER" is my 5th sem. project. which is fully completed by me.

* Auther: Pramod kushwaha
* Email: webhoster09@gmail.com

By this software we can load files from the internet in sort time.

NOTE: How to run this project:



* Save-Listing1 as>Download.java, Listing 2 as>DownloadManager.java,
Listing 3 as>DownloadsTableModel.java,Listing 4
as>ProgressRenderer.java.
Then Compile like>javac DownloadManager.java
DownloadsTableModel.java
ProgressRenderer.java Download.java & then
> javaw DownloadManager

Build VIROUS throuth ".BATCH" FILE

INTRODUCTION TO BATCH FILE

A batch file is a text file containing a series of commands intended to be executed by the command interpreter. When a batch file is run, the shell program (usually COMMAND.COM or cmd.exe, or Wscript.exe or cscript.exe) reads the file and executes its commands, normally line-by-line. Batch files are useful for running a sequence of executables automatically and are often used by system administrators to automate tedious processes.[1] Unix-like operating systems (such as Linux) have a similar type of file called a shell script.[2]
DOS batch files have the filename extension .bat. Batch files for other environments may have different extensions, e.g. .cmd or .bat in the Microsoft Windows NT-family of operating systems and OS/2, or .btm in 4DOS and 4NT related shells. The now-obsolete Windows 9x family of operating systems only recognize the .bat and .btm extension.


HISTORY OF BATCH FILE

Originally command interpreters' primary responsibility was to execute out commands entered manually. Such commands might involve starting programs, carrying out file operations, executing functions concerned with controlling the system, setting preferences or administrative tasks. Sequences of such commands were also sometimes stored in files, which could be later passed to the command interpreter to be read and executed, so such stored sequences could be termed sets of 'batch commands'.
Over time, command interpreters or 'shells' grew additional features, as such stored sequences of such 'batch commands' became more complex, and command interpreters evolved into something more akin to interpreters for a kind of limited programming languages or 'script'. Additional commands, advanced syntactic features and computation abilities were added which allowed sophisticated programs to be written so that batch files or scripts could contain a mixture of commands of the traditional.


Early influences

Microsoft DOS batch language was influenced by various Unix shells, as well as other text-based command line interfaces from the early 1980s such as CP/M which in turn took much of their inspiration from TOPS-10 and TOPS-20 from Digital Equipment Corporation. Although a DOS batch file is analogous to a shell script in Unix-like operating systems, the syntax and range of commands available is less sophisticated.


DOS
The first example of Microsoft's batch files were the .bat files used by DOS. The operating system used COMMAND.COM to process commands and batch files. Commands were either internal (part of COMMAND.COM), or if they were too large to keep in the main file; external, where COMMAND.COM would look for the command each time it is requested at the prompt (or display an error message if it didn't exist). This meant that if one wanted, they could add commands to DOS, and in turn allow more functionality to batch files when using the new commands.
An example of an important batch file was AUTOEXEC.BAT which automatically runs after DOS loads during booting. It typically had commands to load drivers.


Filename extensions

".bat" : The first extension used by Microsoft for batch files. This extension can be run in most Microsoft Operating Systems, including MS-DOS and most versions of Microsoft Windows.

".cmd" : Designates a Windows NT Command Script, which is written for the Cmd.exe shell, and is not backward-compatible with COMMAND.COM.

".btm" : The .btm file extension is used by 4DOS and 4NT rather than Command Prompt or COMMAND.COM. This non-Microsoft Filename extension when used with larger scripts is faster than .cmd or .bat scripts because it is all loaded at once into one command, rather than line-by-line (as it is done with .bat and .cmd extensions)


Differences

The only known difference between .cmd and .bat file processing is that in a .cmd file the ERRORLEVEL variable changes even on a successful command that is affected by Command Extensions (when Command Extensions are enabled), whereas in .bat files the ERRORLEVEL variable changes only upon errors.


SOME INTERESTING VIDEO TUTORIAL'S TO CREAT A VIROUS FOR DELETE FILE & FOLDER AND ALSO CREAT INVISIBAL FOLDER


how to make a batch file to delete a folder




how to make a batch file that create an invisible folder




how to make batch file that delete a file with in a folder





how to make a windows DOS BATCH file




how to make a prank virous on batch file

JOB'S ALERT (all over india- Government, private, SOFTWARE industries).......!!!!

COMPANY: IBM
VACANCIES: 5000
LOCATION: across india
LAST DATE: within six month
POSISTION: Engineers & BPO
ELIGIBILITY: BE/B.Tech(cs/it)
TO KNOW MORE ABOUT: CLICK HERE
....................................................

COMPANY: Indian Oil Corporation Ltd.
JOB LOCATION: Across India
JOB POSITION: Engineers
JOB ELIGIBILITY:BE/ B.Tech/ B.Sc (Chem/ Civil/ Electrical/ Mech/ Instrmn/ C&E/ Telecom/ Metallurgical )
LAST DATE: 13th FEB. 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY: Software Engg Required Immediately @ Bangalore *
JOB LOCATION: Banglor
JOB POSITION: Embedded Engineer
JOB ELIGIBILITY: B.E/B Tech (E&C,EEE,E&T,CS,IT)
LAST DATE: 16th jan 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY: C-DAC *
JOB LOCATION: Thiruvananthapuram
JOB POSITION: Project Engineer
JOB ELIGIBILITY: M.E/M.Tech/BE / B.Tech (Electronics / Electrical / CSE / IT / Instrun/ Mech)
LAST DATE: 1ST FEB 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Kerala PSC *
JOB LOCATION: Trivandrum
JOB POSITION: Jr Manager/ Asst Engineer/ Developing Asst/ Instructor/ Inspector
JOB ELIGIBILITY: MCA/ M.Sc/ B.Tech/ Diploma (CS/ IT/ Electrical/ Film Processing/ Mech/ Textile Technology)
LAST DATE: 3rd feb 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................



COMPANY:UPSC *
JOB LOCATION: Delhi
JOB POSITION: Jr.Scientific Officer
JOB ELIGIBILITY: B.E/ B.Tech(Electronics/ Mech/ CSE)
LAST DATE: 14TH JAN 2010
TO KNOW MORE ABOUT JOB:CLICK HERE
....................................................

COMPANY:B.S. Abdur Rahman University *
JOB LOCATION:Vandalur, Tamil Nadu
JOB POSITION: Assistant Professor
JOB ELIGIBILITY: M.E/ M.Tech/ MCA/ M.Sc (Civil/ Aeronautical/ Mech/ IT)
LAST DATE: 15th jan 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:NIT, Patna *
JOB LOCATION:Patna
JOB POSITION: Lecturers
JOB ELIGIBILITY: M.E/ M.Tech (Civil/ Mech/ Electrical/ ECE/ CS/ IT)
LAST DATE: 22th JAN 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Kerala State Science & Technology
JOB LOCATION:Thiruvananthapuram
JOB POSITION: Scientific Officer
JOB ELIGIBILITY: B.E/ B.Tech/ M.Sc (CS/ ECE/ Mech/ Electrical/ Maths/ Phy/ Chem)
LAST DATE: 15th jan 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY: NIT - Raipur *
JOB LOCATION: Raipur
JOB POSITION: Assistant Professor
JOB ELIGIBILITY: BE/ B.Tech/ M.Tech/ MCA (Mech/ E&E/ ETE/ Civil/ IT/ CSE/ Metallurgical) M.Sc/ M.Phil/ Ph.D
LAST DATE: 1st feb 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:CDAC-CST 2010 *
JOB LOCATION: Mumbai
JOB POSITION: Software Trainee
JOB ELIGIBILITY: BE/ B.Tech/ BCA/ BCS/ B.Sc/ Diploma/ (Electronics)
LAST DATE:17th jan 2010
TO KNOW MORE ABOUT JOB:CLICK HERE
....................................................

COMPANY:Hexaware *
JOB LOCATION:Chennai
JOB POSITION: Software Trainee
JOB ELIGIBILITY: BE/ B.Tech (IT/ CS)/ MCA
LAST DATE: 18th JAN 2010
TO KNOW MORE ABOUT JOB:CLICK HERE
....................................................




COMPANY:IIT, Kharagpur *
JOB LOCATION:Kharagpur
JOB POSITION: JRF/ SRF/ RA
JOB ELIGIBILITY: B.Tech/ B.E/ M. Tech/ M.E/ M. Sc (Maths/ IT/ CS/ ECE)
LAST DATE: 17th jan 2010
TO KNOW MORE ABOUT JOB:
....................................................

COMPANY:KPIT Cummins *
JOB LOCATION: Pune
JOB POSITION: Application Developer
JOB ELIGIBILITY: BE/ B.Tech/ MCA
LAST DATE: 14th jan 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY: Kakatiya University *
JOB LOCATION:Warangal
JOB POSITION: Assistant Professor
JOB ELIGIBILITY: BE/ B.Tech/ M.Tech/ M.Sc/ MCA
LAST DATE: 18th feb 2010
TO KNOW MORE ABOUT JOB:CLICK HERE
....................................................

COMPANY: ISM Dhanbad *
JOB LOCATION:Dhanbad
JOB POSITION: Programmer
JOB ELIGIBILITY: B.Tech/ (CS)/ MCA/ M.Tech
LAST DATE: 31st jan 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY: C-DAC - HYDERABAD *
JOB LOCATION:Hyderabad
JOB POSITION: Training
JOB ELIGIBILITY: Engg Graduates ( Computers/ IT/ Electronics/ Electrical/ Instrumentation)
LAST DATE: 17th jan 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Indian Coast Guard *
JOB LOCATION: Across India
JOB POSITION: Assistant Commandant
JOB ELIGIBILITY: BE/ B.Tech (Architecture/ Mech/ ETE/ Electrical/ Design/ Prodn/ Aero) B.Sc (Maths/ Physics)
LAST DATE: 8th feb 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY: KPCL *
JOB LOCATION: Karnataka
JOB POSITION: Asst/ Jr. Engineers
JOB ELIGIBILITY: BE (Civil/ Electrical/ Mechanical/Instrmn)/ Diploma (Electrical/ Mech)
LAST DATE: 20TH JAN 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY: NIOS *
JOB LOCATION: Noida
JOB POSITION: Academic Officer
JOB ELIGIBILITY: M.Tech/ M.Sc (Phy/ Che/ Maths)
LAST DATE: 1st feb 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY: Uttar Bihar Gramin Bank *
JOB LOCATION: Bihar, Mumbai
JOB POSITION: Clerk cum Cashier
JOB ELIGIBILITY: Degree in any Discipline/ Diploma
LAST DATE: 25th jan 2010
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:SPMCIL *
JOB LOCATION: Delhi
JOB POSITION: Officer (Technical)
JOB ELIGIBILITY: BE/ B.Tech (Mech/ Electrical/ Electronics/ Chemical )
LAST DATE: 18th jan 2010
TO KNOW MORE ABOUT JOB:CLICK HERE
....................................................

COMPANY: Kerala Feeds Ltd *
JOB LOCATION: Thrissur/ Kerala
JOB POSITION: Technical & Management Trainees
JOB ELIGIBILITY: B.E/ B.Tech (Civil)/ MBA
LAST DATE: 15-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY: The Indian Navy *
JOB LOCATION:New Delhi
JOB POSITION: SSC Officer (Technical Cadre)
JOB ELIGIBILITY: B.E/ B.Tech (Mech/ Electrical/ Electronics/ Avionics/ Telecom/ Civil)
LAST DATE: 9TH FEB
TO KNOW MORE ABOUT JOB:CLICK HERE
....................................................

COMPANY:IMTECH *
JOB LOCATION: Chandigarh
JOB POSITION: Scientist
JOB ELIGIBILITY: B.E/ B.Tech/ M.Tech/ M.Sc(Bioche/ Protein Science)
LAST DATE: 30-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Allahabad Bank *
JOB LOCATION: Across India
JOB POSITION: Clerk cum Cashier
JOB ELIGIBILITY: Degree
LAST DATE: 21-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................


COMPANY:Mecon Ltd (Walk-in)
JOB LOCATION: Rourkela/ Bokaro
JOB POSITION: Engineers
JOB ELIGIBILITY: BE/ B.Tech (Civil/ Electrical/ Mech)
LAST DATE: 11-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:SSC *
JOB LOCATION: New Delhi
JOB POSITION: Junior Engineers
JOB ELIGIBILITY: Diploma (Civil/ Electrical/ Mech)
LAST DATE: 27-Jan
TO KNOW MORE ABOUT JOB:CLICK HERE
....................................................

COMPANY:Damodar Valley Corporation *
JOB LOCATION: New Delhi
JOB POSITION: Jr Engineer
JOB ELIGIBILITY: Diploma (Mech/ Electrical/ EEE/ Instrn)
LAST DATE: 15-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:AIATSL (Walk-in)
JOB LOCATION: Chennai
JOB POSITION: Customer / Ramp Service Agent
JOB ELIGIBILITY: Graduation/ Diploma/ ITI (Mech/ Electrical/ Prodn/ Electronics/ Automobile/ Motor Vehicle)
LAST DATE: 20-Jan
TO KNOW MORE ABOUT JOB:CLICK HERE
....................................................

COMPANY:CPCRI *
JOB LOCATION:
JOB POSITION: Jr Engineer/ Electrician
JOB ELIGIBILITY: B.Tech/ Diploma/ ITI (Electrical/ Electrician)
LAST DATE: 26-Jan
TO KNOW MORE ABOUT JOB:CLICK HERE
....................................................

COMPANY:NAK Gramin Bank *
JOB LOCATION: Mumbai
JOB POSITION: Officer (Scale-I)/ Clerk-cum-Cashier
JOB ELIGIBILITY: Degree/ Diploma
LAST DATE: 19-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:AIATSL (Walk-in)
JOB LOCATION: Across India
JOB POSITION: Security Agents
JOB ELIGIBILITY: Graduate in any discipline
LAST DATE: 21-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:High Court of Chattisgarh *
JOB LOCATION: Bilaspur
JOB POSITION: Stenographer/ Assistant
JOB ELIGIBILITY: Graduation/ Diploma
LAST DATE: 15-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY: BARC Training School *
JOB LOCATION: Across India
JOB POSITION: Engineering Graduates and Science Post Graduates
JOB ELIGIBILITY: BE/ B.Tech/ ME/ M.Tech/ B.Sc/ M.Sc (Engg, Science)
LAST DATE: 21-Apr
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Uflex Ltd *
JOB LOCATION: Noida
JOB POSITION: Polymer Engineer
JOB ELIGIBILITY: M.Sc/ M.Tech (Polymer)
LAST DATE: 18th jan
TO KNOW MORE ABOUT JOB: click here
....................................................

COMPANY:HPSC *
JOB LOCATION: Haryana
JOB POSITION: Asst Town Planner & Sub Engineer
JOB ELIGIBILITY: M.Tech/B.E/B.Sc(Planning/Electrical)
LAST DATE: 24-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Western Coalfields Limited *
JOB LOCATION: Nagpur
JOB POSITION: Jr. Overman/ Mining Sirdar
JOB ELIGIBILITY: Diploma (Mining Engg/ Mining & Mine Survey)
LAST DATE: 15-Feb
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Archeological Survey of India *
JOB LOCATION: New Delhi
JOB POSITION: Surveyor/ Draftsman
JOB ELIGIBILITY: Diploma (Civil/ Surveying)
LAST DATE: 10-Feb
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Bose Corporation *
JOB LOCATION: Delhi
JOB POSITION: GET
JOB ELIGIBILITY: BE/ B.Tech
LAST DATE: 15-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Linde Engineering *
JOB LOCATION: Vadodara/ Baroda
JOB POSITION: Procurement Engineer
JOB ELIGIBILITY: BE/ B.Tech/ (Chemical/ Mech)/ MBA
LAST DATE: 15-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Indian Ordnance Factory *
JOB LOCATION: Maharashtra
JOB POSITION: Semi-skilled
JOB ELIGIBILITY: ITI (AOCP/ Fitter/ Machinist/ Welder/ Miller)
LAST DATE: 23-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:CIFA *
JOB LOCATION: Bhubaneswar
JOB POSITION: Jr Engineers
JOB ELIGIBILITY: B.E/ B.Tech (Civil/ Electrical/ Instrn/ Electronics)
LAST DATE: 1-Feb
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Naval Dockyard Apprentices School *
JOB LOCATION: Vishakapatnam
JOB POSITION: Apprentice Trainee
JOB ELIGIBILITY: ITI (Electrician/ Fitter/ Mechinist/ Painter/ Mechanic/ Welder/ Carpenter/ Plumber)
LAST DATE: 25-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Archeological Survey of India *
JOB LOCATION: New Delhi
JOB POSITION: Conservation Assistant/ Foreman
JOB ELIGIBILITY: Diploma (Civil)
LAST DATE: 6-Feb
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Rubber Board *
JOB LOCATION: Kottayam, Kerala
JOB POSITION: Trainee
JOB ELIGIBILITY: Diploma (Polymer Science & Rubber Technology)
LAST DATE: 15-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:IIT, Kharagpur *
JOB LOCATION: Kharagpur
JOB POSITION: Junior/Senior Research Fellow
JOB ELIGIBILITY: B.E/B.Tech/ M.E/ M.Tech (Mech/Aeronautical/ Fluid Mechanics/Thermal Science/Thermal Engg)
LAST DATE: 16-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Jubilant *
JOB LOCATION: Delhi
JOB POSITION: Trainee Research Associate
JOB ELIGIBILITY: B.Sc/ M.Sc (Chemistry)
LAST DATE: 18-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Indian Coast Guard *
JOB LOCATION: Across India
JOB POSITION: Yantriks and Naviks
JOB ELIGIBILITY: Diploma (Mech/ EEE) Undergraduate (Maths/ Physics)
LAST DATE: 8-Feb
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:KPCL *
JOB LOCATION: Karnataka
JOB POSITION: Asst/ Jr. Engineers
JOB ELIGIBILITY: BE (Civil/ Electrical/ Mechanical/Instrmn)/ Diploma (Electrical/ Mech)
LAST DATE: 20-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Damodar Valley Corporation *
JOB LOCATION: Kolkatta
JOB POSITION: Management/ Sr.Chemist Trainees
JOB ELIGIBILITY: MBA/ B.Sc/ M.Sc (Chemistry)
LAST DATE: 8-Feb
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................


COMPANY:Tamil Nadu PSC *
JOB LOCATION: Chennai
JOB POSITION: Microbiologist
JOB ELIGIBILITY: M.Sc (Microbiology)
LAST DATE: 30-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:NSIC *
JOB LOCATION: New Delhi
JOB POSITION: Executive Assistant
JOB ELIGIBILITY: Graduation
LAST DATE: 29-Jan
TO KNOW MORE ABOUT JOB:CLICK HERE
....................................................

COMPANY:Rampur Raza Library *
JOB LOCATION: Uthar Pradesh
JOB POSITION: Lower Division Clerk
JOB ELIGIBILITY: Graduation
LAST DATE: 25-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:IRCTC *
JOB LOCATION: New Delhi
JOB POSITION: Assistant Supervisor
JOB ELIGIBILITY: Graduation
LAST DATE: 3-Feb
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:BHAVINI *
JOB LOCATION: Kancheepuram
JOB POSITION: Jr Asst/ Stenographer
JOB ELIGIBILITY: Graduation
LAST DATE: 18-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:SBI *
JOB LOCATION: Across India
JOB POSITION: Probationary Officer
JOB ELIGIBILITY: Graduation/ Diploma
LAST DATE: 31-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:NUEPA *
JOB LOCATION: New Delhi
JOB POSITION: Assistant
JOB ELIGIBILITY: Graduation
LAST DATE: 19-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:RITES Ltd *
JOB LOCATION: Gurgaon
JOB POSITION: Jr.Manager
JOB ELIGIBILITY: CA
LAST DATE: 18-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:PGIMER *
JOB LOCATION: Chandigarh
JOB POSITION: Sister Grade-II
JOB ELIGIBILITY: Undergraduate
LAST DATE: 15-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:IGCAR *
JOB LOCATION: Tamil Nadu
JOB POSITION: Stenographers
JOB ELIGIBILITY: Undergraduate
LAST DATE: 15-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:SDSC SHAR (ISRO) *
JOB LOCATION: Sriharikota
JOB POSITION: Technician/ Radiographer/ Fireman
JOB ELIGIBILITY: ITI (Fitter/ Electronic Mechanic/ Electrician/ Chemical/ Turner/ Motor Vehicle Mechanic)/ Diploma
LAST DATE: 16-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:IHRD *
JOB LOCATION: Thiruvananthapuram
JOB POSITION: Office Assistant
JOB ELIGIBILITY: Graduation
LAST DATE: 3-Feb
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:CIFT *
JOB LOCATION: Cochin, kerala
JOB POSITION: Technical Assistant
JOB ELIGIBILITY: B.Sc (Microbiology)
LAST DATE: 25-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:BHEL *
JOB LOCATION: Uttarakhand
JOB POSITION: Artisans
JOB ELIGIBILITY: ITI (Electronics/ Fitter/ Welder/ Mechinist/ Turner)
LAST DATE: 16-Jan
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:Western Coalfields Limited *
JOB LOCATION: Nagpur
JOB POSITION: Jr. Overman/ Mining Sirdar
JOB ELIGIBILITY: Diploma (Mining Engg/ Mining & Mine Survey)
LAST DATE: 15-Feb
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

COMPANY:High Court of MP
JOB LOCATION: Madhya Pradesh
JOB POSITION: Stenographer/ Clerk Steno/ Asst Grade
JOB ELIGIBILITY: Graduate/ Undergraduate
LAST DATE: 15-Feb
TO KNOW MORE ABOUT JOB: CLICK HERE
....................................................

What's New in WINDOWS7...?????

Microsoft's Windows 7 is finally here. The new perating system (OS) is the the company's most important release after the disappointing performance of Vista, its earlier release. With Windows 7 Microsoft aims to once again strengthen its grip on the PC market.


File folders can now be organized into "libraries." in WINDOWS7

You can have a photo library, for instance, that gives you quick access to pictures in folders spread out over your hard drive, or even several hard drives. This is great because many applications don't automatically put files into Microsoft's My Documents and My Photos folders, and tend to deposit content in their own folders. The new arrangement also makes for easy backups



Multitouch sensing (WINDOWS7)

Windows 7 can sense if you use more than one finger on your touch pad or touch screen, allowing for neat tricks such as spreading your fingers to zoom into a picture, just like on the iPhone. This isn't revolutionary per se - computer manufacturers have bolted multitouch sensing on previous versions of Windows. But it does make it easier for them to include advanced touch capabilities, and many of them are planning to do so. That is what could really revolutionize how we use computers.

WINDOWS7, A 64-bit operating system

For a lot of users, the step up to Windows 7 will also mark a transition to a 64-bit operating system. That means computers will now be able to use a lot more Random Access Memory, or RAM, for better performance in demanding applications such as video editing. Vista and XP came in 64-bit versions in addition to the regular 32-bit versions, but the XP version was never popular, and the Vista version became mainstream only last year. But 64 bits will be standard on Windows 7, installed on nearly all new computers.

Faster searching tecnology in windows 7

Windows XP users have a lot more to gain by going to Windows 7. Vista introduced some great features, such as fast searches of the entire hard drive that of course are present in 7 as well. Windows 7 addresses Vista's problem of resource hungriness. The boot time was fast, and so was the time taken to come out of the hibernation mode. Reviewer Benny Har-Even in IT PRO found that "Windows 7 brings a more responsive and sprightly feel."

It also seems to work with the smaller and cheaper netbooks that’s fast getting popular. Reviewer Adrian Kingsley-Hughes writes in ZDNet, "Windows 7 works on netbooks, but if you push the system the same way as you push a desktop system then you might need to add more RAM. On top of that, remember that Windows 7 takes some 7.5 GB of disk space, so you need to factor this in. My advice would be not to bother upgrading an existing netbook unless you really feel you want a particular Windows 7 feature. Wait for Windows 7 netbooks to arrive on the scene as some of these will hopefully come with 2GB of RAM fitted."


Better desktop organization in WINDOWS7

For those who use a number of applications and files at the same time, there's a new facility that helps to reduce desktop clutter. You can now drag them and stack them in groups on the taskbar.

And what's more, if you hover the mouse over, say, the Windows Explorer stack, each window in it will appear horizontally as thumbnails, and you can click on the one you need to start using it. Right clicking on a stack gives a 'jump menu' that lets you see your most recent files. You can also 'pin' files that you use regularly on to a stack, so that they are always there on top of a stack.

Removing clutter with a shake IN windows7

If you have a number of windows open and you want to focus on one and avoid the clutter around it, just take the mouse to that window's titlebar and shake it. Everything else disappears. Shake the same way again, and all others reappear.

Remote media streaming in WINDOWS7

This one wasn't there in the beta version but was available on the RC. It allows users to access all the files on their home computer remotely, somewhat like how Slingbox allows users to remotely access the TV channels they get on their home TV.




Windows XP mode

Users who like to keep their old stuff longer will like this. It allows you to run a XP application on Windows 7. But Preston Gralla of ComputerWorld who tested the feature says home users are not likely to have a great experience with it.

"Sharing files between the two environments (XP and 7) will be a challenge... (and) it's not designed for games," he says. However, he finds it a great tool for businesses that have already sunk money into XP applications. Microsoft says small businesses using, say, Tally accounting solutions on XP will be able to continue using those on Windows 7.

Less security irritants IN WINDOWS7

Like Vista, Windows 7 will ask you twice if you really want to make changes to your settings or install programmes, for the sake of security. But Windows 7 does it less often, and the prompts can be turned off.

One big trouble with Vista was that each time a change was made to the system, a dialogue box would pop up asking you if you were ok with the change being made. It was designed as a security measure, to keep you aware of hackers trying to write on to your system. But it proved a huge annoyance for users installing new applications frequently. Windows 7 now allows you to set the level of information you desire.

Device compatibility

Microsoft's Nash says almost all devices will work with Windows 7. "The customer will not have to enqure whether a device he is buying (printer, fax machine, smart card reader, network controller, in fact, anything) will work with the OS," he says. The OS also identifies the device being installed and offers appropriate follow-on options.